Molamu oa ABS

Likarolo tsa Sehlahisoa sa ABS Rod:

---

1. Matla a Phahameng le ho tšoarella

The Molamu oa ABS e etsoa ka thepa ea boleng bo holimo, e fanang ka matla le nako e telele ho mamella likhatello le litlamorao tse fapaneng. E ka sebetsa tlas'a khatello e matla ha e ntse e boloka ts'ebetso ea eona ea mechine.

 

2. E bobebe ebile e bonolo ho sebetsa

Molamu oa polasetiki oa ABS o batla o le bobebe, o etsa hore ho be bonolo ho o jara le ho o sebetsa. E ka khaoloa, ea chekoa, ea kobeha, ea chesoa, 'me ea tlamisoa, e etsa hore e tšoanelehe bakeng sa maemo a fapaneng a ts'ebeliso. Ntle le moo, bokaholimo ba molamu oa polasetiki oa ABS bo boreleli ebile bo bonolo ho bo fetola, bo fana ka maemo a bonolo bakeng sa ts'ebetso e tsoelang pele.

 

3. Khanyetso ea lik'hemik'hale

Molamu oa polasetiki oa ABS o na le khanyetso e matla ho lintho tse ngata tse tloaelehileng tsa lik'hemik'hale, ho kenyelletsa le li-acids, alkalis, solvents, joalo-joalo, e leng se etsang hore e loketse ho sebelisoa lilaboratori tsa lik'hemik'hale, tlhahiso ea indasteri, le tse ling. E boetse e bonts'a thepa e ntle ea ho kenya motlakase, e loketseng ho etsa likarolo tsa elektroniki le lisebelisoa.

 

4. Molemo oa Thermal Stability

The ABS Rod e bonts'a botsitso bo botle ho mocheso o phahameng, e hanela deformation le ho boloka ts'ebetso ea eona ea mochini, e etsa hore e tšoanelehe bakeng sa maemo a mocheso o phahameng. E boetse e na le litšobotsi tse ntle tse thibelang malakabe, e fana ka boemo bo itseng ba tšireletso ha ho ka ba le mollo.

 

Lisebelisoa tsa ABS Rod:

---

1. Phetolelo ea 3D

The Molamu oa ABS ke lisebelisoa tse sebelisoang hangata bakeng sa khatiso ea 3D, e khonang ho etsa mehlala e nang le lintlha tse ntle haholo le matla. E ka sebelisoa ho etsa liroboto, likarolo le mefuta e meng e rarahaneng.

 

2. Ho etsa mochine

The Molamu oa polasetiki oa ABS e loketse bakeng sa machining le tlhahiso ea likarolo tsa mochini tse kang likarolo, li-bearings le li-partitions. E ka sebelisoa ho hlahisa mefuta e fapaneng ea mechini le liroboto tsa indasteri.

 

3. Ho Etsa Mehlala
Ka lebaka la boiketlo ba eona ba ho sebetsa le ho fetoloa, molamu oa polasetiki oa ABS o sebelisoa haholo ho etsa mohlala, mesebetsi ea matsoho le tlhahiso ea mohlala. E ka sebelisoa ho etsa mehlala ea resin, lintho tsa ho bapala, liemahale le mesebetsi e meng ea bonono.

 

Litlhaloso le Boholo:

---

Ntle le boholo bo tloaelehileng, re fana ka lithupa tsa polasetiki tsa ABS tse ikhethileng ka mefuta le boholo bo fapaneng ho fihlela litlhoko tsa merero le litlhoko tse fapaneng.

 

 

Lintlha tsa tekheniki bakeng sa ABS Rod

---

Che	Sehlooho sa teko	Unit	Sephetho Test	Method teko
1	segokanyipalo	g / cm³	1.413	EA-D792-2013
2	Matla a tšepe	Mpa	66.6	GB/T 1040.2/1B-2006
3	Elongation Matla	%	24	GB / T 9341-2008
4	kobang Matla	Mpa	102	GB / T 9341-2008
5	Flexural Modulus ea Elasticity	Mpa	2820	GB/T 1043.1/1eA-2008
6	Charpy Notched Impact Matla	KJ/m²	7.8	GB / T 13520-1992
7	Matla a Tšusumetso ea Ball	/	Ha ho Cracking	GB / T 1633-2000
8	Vicat Heat Resistance (1kg,50℃/h)	℃	163	GB / T 22789.1-2008
9	Sekhahla sa Phetoho ea Boholo ba Mocheso (longitudinal)	%	0.08	GB / T 22789.1-2008
10	Sekhahla sa Phetoho ea Boholo ba Heating (transverse)	%	0.04	GB / T 22789.1-2008
11	Rockwell Hardness (R)	/	118	GB / T 3398.2-2008
12	Surface Resistance Coefficient	Ω	8.5 x 10 ^ 12	GB / T 31838.2-2019
13	Molumo oa Resistance Coefficient	Ω.m	1.3 x 10 ^ 12	GB / T 31838.2-2019
14	Dielectric Constant (1MHZ)	/	3.7	GB / T 1409-2006
15	Tahlehelo ea Dielectric(1MHZ)	/	0.055	GB / T 1409-2006
16	Matla a Dielectric	KV / limilimithara	6.93	GB / T 1408.1-2016
17	Khohlano Coefficient	/	0.18	GB / T 3960-2016

 

Factory

---

J&Q New Composite Material Group Co., Ltd ke moetsi oa naha oa thepa ea ho kenya letsoho le Epoxy Resin, Engineered Plastic. Re na le lifeme tse peli. Li fumaneha Profinseng ea Heibei. E 'ngoe ke Hongda Insulation Materials Factory e thehiloe ka 2000. E koahela sebaka sa lisekoere-mithara tse 30000. Lisebelisoa tse tsoetseng pele tsa ts'ebetso, lisebelisoa tse feletseng tsa ho hlahloba. Lisebelisoa tsohle tsa rona ke workshop ea tlhahiso e ikemetseng ka botlalo. Haholo-holo tlhahiso ke 3420 epoxy sheet grade B, tlhahiso ea selemo le selemo ea lithane tse fetang 13000. ke moetsi o moholo ka ho fetisisa oa lishiti tsa Mophato oa B naheng ea China. 'Me u fumane yuniti e tšepahalang le e ts'eptjoang le Consumer Satisfaction Trust Units le litlotla tse ling tse fanoeng ke mmuso. re fetisitse setifikeiti sa tsamaiso ea boleng ba ISO 9001.

E 'ngoe ke Hebei JingHong Electronic Technology Co., Ltd E nka sebaka sa lisekoere-mithara tse 66667. Chelete e felletseng ea limilione tse 200 tsa CNY, tlhahiso ea selemo ke lithane tse 30,000. JingHong ke k'hamphani e ncha ea thepa e kopanyang lipatlisiso tsa saense, nts'etsopele, tlhahiso, thekiso le tšebeletso. Lihlahisoa tse ka sehloohong ke FR4 sheet, 3240 epoxy sheet grade A, phenolic cotton sheet, Bakelite sheet, copper clad laminate, Epoxy Resin, le Engineered Plastic, tse nang le nts'etsopele ea lihlahisoa tse matla tsa ho pata le bokhoni ba tlhahiso. JingHong e na le mochini o tsoetseng pele ka ho fetesisa oa sekhomaretsi, kompressor e futhumetseng, le mochini o otlolohileng o holimo oa sekhomaretsi o hlomelitsoeng ka ho khetheha bakeng sa maqephe a FR4 o ka netefatsa boleng ba sehlahisoa se setle ka ho fetisisa le bo tsitsitseng.

Re phahamisa boleng pele, botšepehi. Ho sa le joalo, re na le lilemo tse fetang 20 tsa boiphihlelo ba ho hlahisa le ho rekisa li-insulating sheets le lilemo tse fetang 10 tsa boiphihlelo ba kantle ho naha. Lihlahisoa li romelloa Russia, Asia Boroa-bochabela, United States, Europe le linaheng tse ling, 'me palo ea selemo le selemo ea thomello e etsa karolo ea 40% ea kakaretso ea thepa e romelloang Chaena. Ho feta moo, re na le k'hamphani ea rona ea thepa, kahoo re ka fana ka ts'ebeletso e le 'ngoe. Lebella tšebelisano-'moho ea nako e telele.

tiiseletswe

---

 

Pontšo

---

 

Ho paka le ho tsamaisa

---

 

LBH

---

Q: Na u khamphani ea khoebo kapa moetsi?

A: Re moetsi.

 

P: O ka mpha theolelo ea theko?

A: E itšetlehile ka bongata.

 

P: O na le setifikeiti sefe?

A: Feme ea rona e fetisitse setifikeiti sa netefatso ea sistimi ea boleng ba ISO 9001;

Lihlahisoa li fetile tlhahlobo ea ROHS.

 

P: Nka fumana sampole ea mahala?

A: Mehlala ea mahala ea fumaneha.

 

P: Nako ea ho fana ke nako e kae?

A: Ka kakaretso ke matsatsi a 10-15 haeba thepa e le teng, kapa ke matsatsi a 5-10.

 

P: Tefo ke efe?

A: Tefo<=1000USD, 100% esale pele

Tefo> = 1000USD 30% TT esale pele, 70% TT pele e romelloa.