Boto ea ABS

Litšobotsi tsa Sehlahisoa sa Boto ea ABS:

---

1. Ts'ebetso e Ntle ea Mechini: Boto ea ABS e na le matla a phahameng le ho tiea, hammoho le ho monya hamonate, ho khona ho mamella litlamorao tsa kantle ntle le ho robeha habonolo.

2. Khanyetso ea lik'hemik'hale: boto e bonts'a khanyetso e ntle ea lik'hemik'hale tse sa tšoaneng, e lumellang ts'ebetso e tsitsitseng libakeng tse thata tsa ho sebetsa.

3. Khanyetso ea Boemo ba Leholimo: boto e na le khanyetso e ntle ea boemo ba leholimo, e khonang ho sebelisoa nako e telele kahare le kantle ntle le botsofali, deformation, kapa mmala.

 

songolo:

---

Litlhaloso tse tloaelehileng li kenyelletsa botenya ho tloha ho 1mm ho isa ho 100mm, bophara pakeng tsa 600mm ho isa ho 2000mm, le bolelele bo ka khonehang ho latela litlhoko tsa bareki.

 

Likopo tsa Boto ea ABS:

---

Boto ea ABS e fumana lits'ebetso tse pharalletseng makaleng a indasteri ho kenyelletsa, empa e sa felle ho:

1. Elektronike le Motlakase: E sebelisetsoa ho etsa lik'hasete tsa elektronike, lisebelisoa tsa lisebelisoa, joalo-joalo.
2. Indasteri ea Likoloi: E sebelisoa bakeng sa likarolo tse ka hare, likarolo tsa 'mele, joalo-joalo, ho etsa likoloi.
3. Mokhabiso oa Moaho: Hangata e sebelisoa ka har'a liphanele tse khabisitsoeng ka hare, matšoao a khoebo le lits'ebetso tse ling.
4. Thepa ea Bongaka: E sebelisoa ha ho etsoa li-casings tsa lisebelisoa tsa bongaka, liphanele tsa ho itšehla thajana, le tse ling.

 

Ka kakaretso, boto ea ABS, e nang le ts'ebetso e ntle ea mochini, ho hanyetsa lik'hemik'hale, le ho hanyetsa boemo ba leholimo, e loketse lits'ebetso tse fapaneng tsa indasteri. E ka etsoa ho latela litlhoko tsa bareki, ho netefatsa ts'ebetso e tsitsitseng le boleng bo ka tšeptjoang e le mofuta oa sehlahisoa sa polasetiki sa boenjiniere.

Lintlha tsa Teknoloji bakeng sa Boto ea ABS

---

Che	Sehlooho sa teko	Unit	Sephetho Test	Method teko
1	segokanyipalo	g / cm³	1.413	EA-D792-2013
2	Matla a tšepe	Mpa	66.6	GB/T 1040.2/1B-2006
3	Elongation Matla	%	24	GB / T 9341-2008
4	kobang Matla	Mpa	102	GB / T 9341-2008
5	Flexural Modulus ea Elasticity	Mpa	2820	GB/T 1043.1/1eA-2008
6	Charpy Notched Impact Matla	KJ/m²	7.8	GB / T 13520-1992
7	Matla a Tšusumetso ea Ball	/	Ha ho Cracking	GB / T 1633-2000
8	Vicat Heat Resistance (1kg,50℃/h)	℃	163	GB / T 22789.1-2008
9	Sekhahla sa Phetoho ea Boholo ba Mocheso (longitudinal)	%	0.08	GB / T 22789.1-2008
10	Sekhahla sa Phetoho ea Boholo ba Heating (transverse)	%	0.04	GB / T 22789.1-2008
11	Rockwell Hardness (R)	/	118	GB / T 3398.2-2008
12	Surface Resistance Coefficient	Ω	8.5 x 10 ^ 12	GB / T 31838.2-2019
13	Molumo oa Resistance Coefficient	Ω.m	1.3 x 10 ^ 12	GB / T 31838.2-2019
14	Dielectric Constant (1MHZ)	/	3.7	GB / T 1409-2006
15	Tahlehelo ea Dielectric(1MHZ)	/	0.055	GB / T 1409-2006
16	Matla a Dielectric	KV / limilimithara	6.93	GB / T 1408.1-2016
17	Khohlano Coefficient	/	0.18	GB / T 3960-2016

 

Factory

---

J&Q New Composite Material Group Co., Ltd ke moetsi oa naha oa thepa ea ho kenya letsoho le Epoxy Resin, Plastiki ea Engineered. Re na le lifeme tse peli. Li fumaneha Profinseng ea Heibei. E 'ngoe ke Hongda Insulation Materials Factory e thehiloe ka 2000. E koahela sebaka sa lisekoere-mithara tse 30000. Lisebelisoa tse tsoetseng pele tsa ts'ebetso, lisebelisoa tse feletseng tsa ho hlahloba. Lisebelisoa tsohle tsa rona ke workshop ea tlhahiso e ikemetseng ka botlalo. Haholo-holo tlhahiso ke 3420 epoxy sheet grade B, tlhahiso ea selemo le selemo ea lithane tse fetang 13000. ke moetsi e moholo ka ho fetisisa oa lipampiri tsa Mophato oa B naheng ea China. 'Me u fumane yuniti e tšepahalang le e ts'eptjoang le Consumer Satisfaction Trust Units le litlotla tse ling tse fanoeng ke mmuso. re fetisitse setifikeiti sa tsamaiso ea boleng ba ISO 9001.

E 'ngoe ke Hebei JingHong Electronic Technology Co., Ltd E nka sebaka sa lisekoere-mithara tse 66667. Chelete e felletseng ea limilione tse 200 tsa CNY, tlhahiso ea selemo ke lithane tse 30,000. JingHong ke k'hamphani e ncha ea thepa e kopanyang lipatlisiso tsa saense, nts'etsopele, tlhahiso, thekiso le tšebeletso. Lihlahisoa tse ka sehloohong ke FR4 sheet, 3240 epoxy sheet grade A, phenolic cotton sheet, Bakelite sheet, copper clad laminate, Epoxy Resin, le Engineered Plastic, tse nang le nts'etsopele ea lihlahisoa tse matla tsa ho pata le bokhoni ba tlhahiso. JingHong e na le mochini o tsoetseng pele ka ho fetesisa oa sekhomaretsi, kompressor e futhumetseng, le mochini o otlolohileng o holimo oa sekhomaretsi o hlomelitsoeng ka ho khetheha bakeng sa maqephe a FR4 o ka netefatsa boleng ba sehlahisoa se setle ka ho fetisisa le bo tsitsitseng.

Re phahamisa boleng pele, botšepehi. Ho sa le joalo, re na le lilemo tse fetang 20 tsa boiphihlelo ba ho hlahisa le ho rekisa li-insulating sheets le lilemo tse fetang 10 tsa boiphihlelo ba kantle ho naha. Lihlahisoa li romelloa Russia, Asia Boroa-bochabela, United States, Europe le linaheng tse ling, 'me palo ea selemo le selemo ea thomello e etsa karolo ea 40% ea kakaretso ea thepa e romelloang Chaena. Ho feta moo, re na le k'hamphani ea rona ea thepa, kahoo re ka fana ka ts'ebeletso e le 'ngoe. Lebella tšebelisano-'moho ea nako e telele.

tiiseletswe

---

 

Pontšo

---

 

Ho paka le ho tsamaisa

---

 

LBH

---

Q: Na u khamphani ea khoebo kapa moetsi?

A: Re moetsi.

 

P: O ka mpha theolelo ea theko?

A: E itšetlehile ka bongata.

 

P: O na le setifikeiti sefe?

A: Feme ea rona e fetisitse setifikeiti sa netefatso ea sistimi ea boleng ba ISO 9001;

Lihlahisoa li fetile tlhahlobo ea ROHS.

 

P: Nka fumana sampole ea mahala?

A: Mehlala ea mahala ea fumaneha.

 

P: Nako ea ho fana ke nako e kae?

A: Ka kakaretso ke matsatsi a 10-15 haeba thepa e le teng, kapa ke matsatsi a 5-10.

 

P: Tefo ke efe?

A: Tefo<=1000USD, 100% esale pele

Tefo> = 1000USD 30% TT esale pele, 70% TT pele e romelloa.